ALLOY WIRE RODS

• These are used for redrawing into Wires for manufacture of all aluminium Alloy Conductors (AAAC). Due to various advantages AAAC is replacing conventional ACSR/AAC.

SPECIFICATIONS
1. Diameter :	9.5 mm +/- 0.5 mm | 7.6 mm +/- 0.5 mm T4 grade Rod.
2. Quality :	Alloy AA 6201 equivalent to IS 64401 as per IS 9997 having following chemical composition.
	ELEMENT % COMPOSITION Si 0.50 to 0.90 Mg 0.50 to 0.90 Fe 0.50 Max Cu 0.10 Max Mn 0.03 Max Cr 0.03 Max Zn 0.10 Max Al Remainder   Temper: Normally in “M” Temper, i.e., as manufactured condition.
3. Mechanical properties :
Tensile Strength :	15 to 20 Kg/mm2
Elongation	7 to 11% on 250 Gauge Length
4. Electrical properties :
Conductivity :	54 to 56% IACS
5. Coil Weight :	Varies between 1000 to 2000 Kgs.